三峡水库区巫山新县城库岸综合治理设计回顾     

刘加龙  张纯根 《中国地质灾害与防治学报》2005,16(3):24-27

三峡水库区巫山新县域库岸综合治理工程范围内涉及到滑坡、泥石流、塌岸等多种地质灾害。治理工程综合运用了多种技术与结构措拖，工程的复杂性和典型性在整个三峡库区具有极强的代表意义。笔者对整个治理方案的布置情况进行了归纳总结，并以翔实的第一手资料对治理工程设计过程中出现的几种典型问题一一进行了分析与论述．提出了相应的解决方案与合理化建议。结论认为，库岸综合治理工作，必须根据不同的地形特征，结合城区总体布局及沿线市政工程建设，综合考虑，有机结合，做到治理和利用相结合，最大限度地改善新城建设用地环境和城市生态环境。设计人员必须依照现场实际条件进行动态设计，确保工程方案合理、可靠、经济。文中讨论的问题和实践经检对同类工程具有一定的借鉴意义。  相似文献   

Laser Ablation ICP-MS Developments and Trends for 2003     

Paul J. Sylvester 《Geostandards and Geoanalytical Research》2005,29(1):41-52

This annual review of laser-ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS) covers the year 2003. Significant advances were made in understanding laser-sample interactions. In particular, research defined the distribution of particle sizes produced by the interplay of laser wavelength, laser pulse width and the gas environment of ablation. A link between particle sizes and elemental and isotopic fractionation at both the ablation site and in the ICP was established. Experimental 15 7 nm and femtosecond laser systems were tested with promising results. The number of applications of LA-ICP-MS in geology and environmental Earth science continued to grow with particular interest in element concentration and isotope ratio profiling of materials, linking composition to time scales. In situ isotopic ratio measurements were increasingly made using multicollector magnetic sector ICP-MS instruments. Other applications of wide interest included bulk sampling of rocks and ores prepared as lithium borate glasses; low level analysis of platinum-group elements, rhenium and gold in sulfides, metal and silicates; in situ uranium-lead zircon geochronology; and melt and fluid inclusion analysis.  相似文献   

GGR Critical Review of Analytical Developments in 2003     

Janet M. Hergt  L. Paul Bédard  Etienne Deloule  Kathryn L. Linge  Paul J. Sylvester  Michael Wiedenbeck  Jon D. Woodhead 《Geostandards and Geoanalytical Research》2005,29(1):5-52

The articles that comprise this critical review serve to draw attention to research papers published in specific fields of interest during 2003, provide critical comment on the relevance and importance of individual publications in these fields, and offer an overview of the comparative importance of advances in particular areas. In this way, these articles aim to assist experts in the field by keeping them informed of relevant recent publications, as well as providing an important resource for students or early career researchers who are embarking on studies in an area new to them. This year, five papers provide summaries of developments in bulk sample determinations employing (1) ICP-AES and ICP-MS (trace elements), (2) XRF and atomic absorption spectrometry and INAA, (3) isotope ratio measurements (TIMS, MC-ICP-MS, ICP-MS, ToF), as well as in situ measurements conducted using (4) secondary ion mass spectrometry and (5) laser ablation ICP-MS (trace element and isotope ratio determinations).  相似文献   

Determination of Lithium, Beryllium and Boron at Trace Levels by Laser Ablation-Inductively Coupled Plasma-Sector Field Mass Spectrometry   总被引：1，自引：2，他引：1  

Massimo Tiepolo  Alberto Zanetti  Riccardo Vannucci 《Geostandards and Geoanalytical Research》2005,29(2):211-224

The analytical capabilities of laser ablation (LA)-ICP-MS in determining Li, Be and B at trace levels in geological samples have been tested on a series of glass reference materials and natural samples. The LA-ICP-MS instrument used consisted of a sector-field ICP-MS coupled with a laser ablation microprobe operating at either 266 or 213 nm wavelength. Reference glasses from NIST (SRM 612, 614 and 616) and MPI-DING (KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, T1-G and ATHO-G) were selected to develop the analytical method and to assess the best instrumental configuration. A series of calcic amphiboles with different Li, Be and B concentrations were also analysed using both LA-ICP-MS and SIMS to test the applicability of the method to natural minerals. Results indicated that with a spot size of 40 μm the agreement between measured and reference values of Li, Be and B is generally better than 10% for NIST SRM 612 and 20% for NIST SRM 614. Average reproducibility at the 2s level was 10% for Li, 20% for Be and 15% for B. Limits of detection were approximately 100 ng g^-1 for Be and B and 200 ng g^-1 for Li. These results were confirmed by analyses carried out on natural amphiboles and compared well in terms of precision and accuracy with those commonly achieved by SIMS.  相似文献   

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths   总被引：5，自引：1，他引：5  

Marcel Guillong  Kathrin Hametner  Eric Reusser  Stephen A. Wilson  Detlef Günther 《Geostandards and Geoanalytical Research》2005,29(3):315-331

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.  相似文献   

Microcrack networks in granite affected by a fault zone: Visualization by confocal laser scanning microscopy     

Celia T. Onishi  Ichiko Shimizu   《Journal of Structural Geology》2005,27(12):170

Microcracks in the Cretaceous Ryoke-type granite in Japan were investigated by using deep drilling core samples collected in the Mizunami Underground Research Project of the Japan Nuclear Cycle Development Institute (JNC). The granite body suffered brittle deformation associated with Tertiary thrust movement. Based on core-scale and microscopic deformation features, the drill core from a depth of 300 to 700 m is divided into four domains, i.e. (A) undeformed granite, (B) granite intruded by cataclastic seams, (C) fractured granite in the fault damage zone, and (D) foliated cataclasite at the fault center. To characterize microcrack geometries in each domain, we employed the impregnation method using a low-viscous acrylic resin doped with fluorescent agents and captured the microcrack images by confocal laser scanning microscopy (CLSM). The CLSM image in the fault damage zone revealed anisotropic development of microcrack networks related to the fault movement. Both CLSM observation and porosity measurements reveal a drastic increase of micro-pores in the foliated cataclasite, possibly caused by fragmentation, and granulation and crack sealing in the fault zone.  相似文献   

三江并流世界自然遗产地旅游地质景观成景地质作用初步分析     

王嘉学  明庆忠  杨世瑜  彭秀芬 《云南地理环境研究》2005,17(3):53-56,80

三江并流世界自然遗产地丰富独特的旅游地质景观是多种地质作用与不同成景岩组交互叠加作用的结果。其发育的地层基础主要为碳酸盐成景岩组、变质岩成景岩组、碎屑岩成景岩组以及岩浆岩成景岩组等,典型内力成景地质作用为板块缝合作用、断裂成景作用、变质成景作用,外力作用则主要有河流、冰川、丹霞、地热、喀斯特作用等。  相似文献   

人口生态生产:人地作用机制下"三江并流"世界遗产保护的新视角     

熊理然  骆华松 《云南地理环境研究》2005,17(6):69-73

基于不同人口需要而进行的人类活动对“三江并流”区的地理环境产生了巨大影响,形成了独具特色的人地作用机制。这一作用机制一方面对“三江并流”世界遗产的保护构成了威胁,但另一方面,通过人口生态生产,实现人口数量、质量、结构和分布的生态化,改进人类活动,也可优化“三江并流”区的地理环境,保护“三江并流”世界遗产,实现该地区的可持续发展。  相似文献   

Semi‐analytical solution to one‐dimensional consolidation for unsaturated soils with semi‐permeable drainage boundary under time‐dependent loading          下载免费PDF全文

L. Wang  D. A. Sun  A. F. Qin  Y. F. Xu 《国际地质力学数值与分析法杂志》2017,41(16):1636-1655

This paper presents semi‐analytical solutions to Fredlund and Hasan's one‐dimensional consolidation of unsaturated soils with semi‐permeable drainage boundary under time‐dependent loadings. Two variables are introduced to transform two coupled governing equations of pore‐water and pore‐air pressures into an equivalent set of partial differential equations, which are easily solved by the Laplace transform. The pore‐water pressure, pore‐air pressure and settlement are obtained in the Laplace domain. Crump's method is adopted to perform the inverse Laplace transform in order to obtain semi‐analytical solutions in time domain. It is shown that the present solutions are more general and have a good agreement with the existing solutions from literatures. Furthermore, the current solutions can also be degenerated into conventional solutions to one‐dimensional consolidation of unsaturated soils with homogeneous boundaries. Finally, several numerical examples are provided to illustrate consolidation behavior of unsaturated soils under four types of time‐dependent loadings, including instantaneous loading, ramp loading, exponential loading and sinusoidal loading. Parametric studies are illustrated by variations of pore‐air pressure, pore‐water pressure and settlement at different values of the ratio of air–water permeability coefficient, depth and loading parameters. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

徕卡RTC360三维激光扫描仪在竣工测量中的应用     

汪晓慧  吴晓培 《测绘通报》2019,(10):150-154,159

徕卡RTC360不仅操作简单、扫描速度快，而且非常智能。可以实时跟踪计算两个连续站点间的相对位置，点云实时预拼接。后期搭配Register360智能拼接软件，点云智能拼接处理，无需人工干预，简单高效。  相似文献